What do you want to do to your rig, when you get funds thread.

[buckshot500]

I am planning to swap in an 8.8 disc rear axle with 4:56 gears.
Also an Aussie locker.

Change front axle ratio from 3:07 to 4:56.

Advanced adapters SYE, with new double Cardan shaft.

3 or 4" spring under lift.

35" Super Swampers.

6 into 2 exhaust header w/duel exhaust side exit, in front of rear wheels.
May use glasspacks with this.

Strengthen roll bar, with front hoop, & frame tie-in's all around.
Also hood line bars, to my stinger.

Build my own rectangular tube, rear bumper/air tank.

Line my tub.

Taurus electric fan.

Build my own on board welder, from an alternator;
http://www.jeepsunlimited.com/forums/showthread.php?t=791158&highlight=resistor+wire

On board air;http://www.jeepaholics.com/tech/OBA2/

Mustang seats;http://www.jeepaholics.com/tech/mustangseats/mustangseats.htm

Maybe, just maybe I might paint the old heep "Subdued Urban Camouflage" FTW!!!!

EDIT; enigmaverse reminded me that I want to do some underside protection, & a CB radio too.

Re EDIT; I'm now wanting a six into two header, & duel exhaust with glasspacks & side outs in front of the rear tires

Last but not least, Wheel it more often!!!

[enigmaverse]

Being bone stock (accept for a Volant CAI), I got plenty:

1. I'm tossing between 33's and 35's: 33's good for now and the mud, and no need to regear, 35's require a regear.

2. 3" coil spring lift, probably either Teraflex or Rubicn Express

3. Winch, at least an 8000lbs. probably be better off with a 9.5

4. Front bumper: who knows? probably a midwidth, maybe I'll just chop mine down as a temp

5. Muffler relocation

6. Evap Canister relocation

7. Front Skid plate

8. KC HiLights for the hood

and any number of additional crap.

Oh and a CB... thats at the top of the list.

[NCJeepin]

1. Clutch

2. Stronger Axles

3. Lift springs

4. 33's - 35's

5. Lockers/regear if needed


In between those, paint and inside liner..

[Beachjeep]

I need a CB so I know what the hell kind of trail Dave is taking us down. Second thought maybe its better I don't know..lol

[enigmaverse]

:iagree: serously... that may be a pre christmas investment.

[cst756]

This is more like a wish list that will never come true, but

1. 4.56 gears for my dana 44s

2. Detroit tru-trac lockers front and rear

3. 6.0 vortec swap (entire drivetrain)

4. 3" body lift

5. 36" BFG MTs

6. BJ's prerunner front bumper with a WARN 15000

7. BJ's Cliffhanger rear bumper with spare tire carrier

8. Any type of roof rack with about 20 lights on it and all the nessacities(shovel, hi-lift, and such not).

9. Yukon HD axles front and rear

If you guys get to reading this and feel that you want to help I will be more that happy to take your donations.

[SCJEEP]

mines better
1. 304s fuel injection kit
2. 3.5 skyjacker yj springs to soa
3. d60s or rockwells
4.38 or 40 bogger
5. new seats
6. custom cage
7. detroits with 4.88 gears
8. new gauges
9. twin stick conversion
10.paintjob hate white
11. Marine audio system
12.winning lottery ticket to fund all of this

[SCJEEP]

I need a CB so I know what the hell kind of trail Dave is taking us down. Second thought maybe its better I don't know..lol

got a walmart one that i dont need anymore if ya wanna make us even

[sungoesdown]

j-10

new paint, nothing special
soa/sf
6" lift springs
d60s with 5ish gears locked
fifty-ish inch boggers
brow, small back glass, extended cab(need room for some 15s)
460 stroked on juice with t18 trans, np208
big, cheap winch
homemade bumpers and sliders

waggy-
de-wooded painted black
soa/sf
35" nittos(g/f likes them)
w/t axles from my j truck with decent gearing
'special' tail gate
4oh1

[Beachjeep]

got a walmart one that i dont need anymore if ya wanna make us even

Saw it to late got one coming from E-bay.

[bigredtopher]

finish my rear 9"
build a hp 44 for the front
remove the rear seats and add buckets
roll cage
stroker or v8
38's
dana 300 twin sticked
no doors...when it's not a DD
rhino line the interior
....gahh lots of other things but not that important yet....

[surfnturf]

My list changes every time I get on the computer. The basic essentials are this.
SOA using Scout II springs.
Front D44 to match the rear with 4.88 gears and Aussie lockers.
GM power steering conversion
High steer
36" to 38" tires
Rear tire carrier
Im actually pretty close now if I can just find some welding and fab time.
Oh.. I need a Warn overdrive so I can come wheel in the coastal area without having to trailer it. My 4.88 gears do not like the highway.
Basically something like this when its done.
http://i329.photobucket.com/albums/l370/surfnturf65/100_0751.jpg

[WVMudn'eer]

After Sunday's outing I came up with a list:

- pressure washer

[bowtieman55]

I want a full tank of gas:ack2:

[Gorillak5]

First thing full cage!
Communication and wiring upgrades
Crossover stearing and maybe hydro assist
52" springs up front and 56" in the rear
SM465 (Ditch the Auto)
Build some real bumpers and sliders

IF money fell from the sky?
Stak monster box 3 speed, or 203/205 doubler
NV4500 trans
ONe tons, 4.56's, ARB front, detroit rear

[1/2aBronco]

Short term list
-Install Winch
-Overheating review - (Radiator,electric fan, thermostat, water pump - ect)
-6" Lift
-CB
-35" Tires (rims may be needed for backspacing)


Longterm list
-Alternator upgrade
-On Board Air
-Solid front Axle (D44 TTB doesn't cut it)

I wish list
-switch to manual
-PSD :arf:
-Ton Axles
-Rear winch

[russtyenc]

List of future modes for my 1987 cherokee.

1.Its got 9ins of lift now i want it up about 6 more inches.
2.Swap the 4.0 with a cummins diesel include all ness. parts
3.Change axlles out with Dana 60s
4.Exterior rollcage
5.49in iroks


Its going to take alot of hard work but anythings possible.

[Slop]

Well lets see::arf:

kneads: :thumbsup:

hydro assist

205 and cross member

Cage work

4 racing seats

winch on the front

Wants::reddevil:

front and rear stirring ROCK!

Recenter 8 bolts

47s

LowMax 205

383 on pain

52' springs and 56'springs

winch on the rear

[Four_Play]

Install Winch/bumper combo!!!
On Board Air
Front and rear air lockers.
New shocks
New 3" exhaust.
Unsure about a lift, I kinda like the way she sits now, any opinions?
and when I hit the lottery, full body media blast and paint!:cheers2:

[GreenFord]

Hydro assist steering..... maybe some bigger tires..:dita:

[FryGuy]

In order of probable accomplishment:

Things I have ready:
1. Change my 35's back to 33's
2. Install CB
3. Install my extended brake lines
4. Remove my top and install my full cage (When it gets warm)
5. Have a soft top made

Whenever I get funding and in any order:
6. Alcan 4" lift
7. Shackle Reversal Kit
8. U-Bolt Reversal Kit
9. Rear Locker
10. Winch

[buckshot500]

I am planning to swap in an 8.8 disc rear axle with 4:56 gears.
Also an Aussie locker.

Change front axle ratio from 3:07 to 4:56.

Advanced adapters SYE, with new double Cardan shaft.

3 or 4" spring under lift.

35" Super Swampers.

6 into 2 exhaust header w/duel exhaust side exit, in front of rear wheels.
May use glasspacks with this.

Strengthen roll bar, with front hoop, & frame tie-in's all around.
Also hood line bars, to my stinger.

Build my own rectangular tube, rear bumper/air tank.

Line my tub.

Taurus electric fan.

Build my own on board welder, from an alternator;
http://www.jeepsunlimited.com/forums/showthread.php?t=791158&highlight=resistor+wire

On board air;http://www.jeepaholics.com/tech/OBA2/

Mustang seats;http://www.jeepaholics.com/tech/mustangseats/mustangseats.htm

Maybe, just maybe I might paint the old heep "Subdued Urban Camouflage" FTW!!!!

EDIT; enigmaverse reminded me that I want to do some underside protection, & a CB radio too.

Re EDIT; I'm now wanting a six into two header, & duel exhaust with glasspacks & side outs in front of the rear tires

Last but not least, Wheel it more often!!!

Just reviewing this, & found I've done four of these.

The roll bar, just did it, but still need the frame tie-in's.

The OBA.

The OBW.

The CB radio.

I have the Taurus fan, but still need a high amp relay for the high speed.
Not installed yet either.

66bronco is working on removing a square tube tube bumper from an old XJ he has. I'll just need to trim out some metal & weld it up on the ends, for a tank. May need to relocate or replace the mounting brackets as well.

So six of these will be done soon.

Shame I couldn't use this years tax return for the drivetrain upgrades I really wanted!

[Jakemd98]

Ahh the ever changing list...

1. Detroit Tru-trac in the front
2. Mid-arm lift with johnny joints all the way around and true 4 linked rear
3. Have knuckles machined and keyed for high steer and build a high-steer/cross-over steering set-up with 1 ton TREs.
4. Dodge durango steering box
5. Convert my a/c to OBA
6. Tube fender high-line kit front and rear
7. skid plate skid plate skid plate.
8. 35's
9. HD coils in the rear and ACOS up front
10. bumpers and winch.
11. NV4500 with early Chevy 1st gear
12. Stak 3 speed and new rear DS
13. motor re-build
14. fix what ever is broken

keep in mind none of these things are in order... just when i absolutely need them or when i get around to them.

[Trail_Raider]

This is more like a wish list that will never come true, but

1. 4.56 gears for my dana 44s

2. Detroit tru-trac lockers front and rear

3. 6.0 vortec swap (entire drivetrain)

4. 3" body lift

5. 36" BFG MTs

6. BJ's prerunner front bumper with a WARN 15000

7. BJ's Cliffhanger rear bumper with spare tire carrier

8. Any type of roof rack with about 20 lights on it and all the nessacities(shovel, hi-lift, and such not).

9. Yukon HD axles front and rear

If you guys get to reading this and feel that you want to help I will be more that happy to take your donations.

Great list, are you talkin about the XJ in your signature? Not sure if you knew this but XJ's are a unibody jeep, which cant have body lifts, so number 4. prob wont work out ever...

[enigmaverse]

Great list, are you talkin about the XJ in your signature? Not sure if you knew this but XJ's are a unibody jeep, which cant have body lifts, so number 4. prob wont work out ever...

that was for his FSJ he just sold... too bad the jeeps change more often than the list does... :)

[BonesWK]

4xGuard Matrix Brush Guard

4xGuard Rock Rails

4xGuard Front Skid

4" Superlift

33-35's on Cragar soft 8 17"

CB

Basically this look with some variations
http://www.4xguard.com/Images/MATRIX%20C.JPG:cornut:

[NCJeepin]

Wow.. I LIKE that

[enigmaverse]

Being bone stock (accept for a Volant CAI), I got plenty:

1. I'm tossing between 33's and 35's: 33's good for now and the mud, and no need to regear, 35's require a regear.
2. 3" coil spring lift, probably either Teraflex or Rubicn Express
3. Winch, at least an 8000lbs. probably be better off with a 9.5
4. Front bumper: who knows? probably a midwidth, maybe I'll just chop mine down as a temp
5. Muffler relocation
6. Evap Canister relocation
7. Front Skid plate
8. KC HiLights for the hood
and any number of additional crap.

Oh and a CB... thats at the top of the list.

CB, Check.
3" Lift, Check.
35's, Check.
Evap Relo, Check.
Front Skid? not sure I need...stock stuff is doing its job
Muffler relo... maybe after I dent this one to hell.

Time for a new list:

1. 9.5 or 10000lb winch
2. Stubby front bumper
3. Rear bumper w/ tire carrier
4. Additional lighting. probably KC's
5. Front and rear adj. control arms.
6. Front adj. trackbar
7. Soft doors... so I can stop scratching the hell out of my hard doors. :)
8. Front D44 with e-locker... need to find me a wrecked JK rubi.

[pmcg27]

tune my c/b so i can get past the end of the street, and rear bumper. just trying to keep it real.

[XJ_Dutch]

Hmm....

1. Front tow hooks
2. CB radio
3. 33's
4. new rear leafs
5. rocker guards, gas tank skid, and whatever other skids I stumble upon
6. 8.8 OR d44 with 4.10 and find a d30 with 4.10 instead of regearing mine
7. winch bumper
8. winch
9. aussie or lock-right in the rear
10. e-locker up front
11. snorkel

12. blah blah whatever else I can think of :biggrin:


And the list will vary. But whateva :hat:

[buckshot500]

tune my c/b so i can get past the end of the street, and rear bumper. just trying to keep it real.

http://www.offroaders.com/info/tech-corner/reading/swr.htm
http://www.offroaders.com/info/tech-corner/reading/antenna.htm

[cst756]

With this new XJ I really just want to lift and lock it with some rockrails. Thats about it. Maybe some 33's if I lift it tall enough.

[cmgorman94]

1. 36x12.50 TSLs
2. Hook CB back up
3. Gas Tank Skid
4. Warn Winch
5. Roll Cage additions/maybe complete custom cage (probably just get this one http://www.swracecars.com/Files/pdf/roll%20cage%20acc.pdf)
6. A to Z Fab Rocker Guards.
7. Line the tub and find factory black carpet

[jeeplaxer28]

when the wallet permits,
1. lockers
2. winch
3. fuel injection conversion for my new 258
4. gears
5. on board air

[enigmaverse]

CB, Check.
3" Lift, Check.
35's, Check.
Evap Relo, Check.
Front Skid? not sure I need...stock stuff is doing its job
Muffler relo... maybe after I dent this one to hell.

Time for a new list:

1. 9.5 or 10000lb winch
2. Stubby front bumper
3. Rear bumper w/ tire carrier
4. Additional lighting. probably KC's
5. Front and rear adj. control arms.
6. Front adj. trackbar
7. Soft doors... so I can stop scratching the hell out of my hard doors. :)
8. Front D44 with e-locker... need to find me a wrecked JK rubi.

Time to update the list again:

12K Winch, Check
Stubby front bumper, Check
Rear bumper and tire carrier, check
Additional light, Check
Adj. Front trackbar, Check

Plus a few others:
upgraded driveshaft
rear shock support relocation (EVO Rockstars)
HD Tie rod
Chromo rear axleshafts
sPOD electrical control panel
d30 sleeves and gussets

And for the new list:

1. front and rear adjustable LCA's
2. regear to 5.13s
3. front locker
4. chromo shafts up front
5. skid protection

Soft doors need to come down in price before there even considered an option...

[blackknight_4x4_]

1 tons
soa
38's
4.88 gears
stubby front bumper
rocker slides

[BonesWK]

Solid Axle Swap (Long down the road)
Sliders
More Armor
35's - SFA will be needed for that
Rola Roof Rack

oh and to get it paid off.... blah

[Jakemd98]

Detroit Tru-Trac front.
Mid arms, stretch rear and fuel cell.
corner guards with flare.
Armor armor armor.

[Blackfish]

Put in a new 2.5l move 4 inches forward and push a Klune V in 36 inch TSLs

[Zachs]

Mine is more about time...

Boatsides
put in the 44/14b
bend up a cage
comp cut and stretch
throw the tank in the back until I get a fuel cell
cut the hood up and make new inner-fenders
windshield quick release
belly up
Set up the D300 with the 4:1 gears (might do that tonight actually)
Set up the gears in the 44/14b
Measure out the suspension
Pick up some coilovers
40-42" on 16.5s

[WVMudn'eer]

4:56 gears and reweld diffs
body lift or cut more body off
37 or 38s